📦 Package Contents
-
Metal frame parts (4 posts, cross beams, diagonal beams, top support frame)
-
Hardtop roof panels (double-tier design)
-
Netting set (with zippers)
-
Top decorative cap
-
Hardware kit (screws, nuts, washers)
-
Tool kit (hex wrench)
-
Instruction manual
🛠 Assembly Steps
Step 1: Prepare the Site and Parts
-
Choose a flat, stable surface and clear away debris.
-
Unpack and organize all components according to the instruction manual for easy access.
Step 2: Assemble the Posts and Base Plates
-
Attach the 4 posts to the base plates using screws.
-
Ensure all posts are vertical and base plates are level to avoid tilting.
Step 3: Install the Top Frame
-
Connect the top of the posts with horizontal beams to form the square/rectangular frame.
-
Add diagonal support beams for enhanced stability.
Step 4: Install the Roof Frame
-
Attach the main roof support beams (center beam and diagonal beams) to the top frame.
-
Install the upper support structure for the double-tier top.
Step 5: Install Upper Roof Panels
-
Fix the smaller upper-tier panels onto the upper roof frame.
-
Secure the top decorative cap to seal and enhance the appearance.
Step 6: Install Lower Roof Panels
-
Starting from one side, fix the lower-tier hardtop roof panels to the roof frame.
-
Align each panel carefully and secure with screws.
Step 7: Attach the Netting
-
Slide the hooks of the netting into the pre-installed rail track.
-
Adjust each side so that the netting opens and closes smoothly.
Step 8: Final Check and Reinforcement
-
Check all screws to ensure they are tightened securely.
-
For windy areas, consider adding ground stakes or extra weights for better stability.
✅ Usage & Maintenance Tips
-
We recommend at least 4 people for assembly.
-
Regularly check and tighten all screws.
-
In extreme weather (storms, heavy snow), consider temporarily removing the roof panels.
-
For cleaning, use warm water and mild detergent—avoid harsh chemicals.