📦 Package Contents
-
4 × PVC water weight bags
-
4 × Sealing caps
-
4 × Velcro straps (attached to bags)
🛠 How to Use the Water Weight Bags
Step 1 – Unfold the Bags
Take out the four water bags from the package and unfold each one completely.
Step 2 – Open the Water Inlet
Unscrew the cap on top of the water bag to open the filling port.
Step 3 – Fill the Bag with Water
-
Fill the bag with clean water using a hose or container.
-
Recommended filling capacity: 70–80% full (for best stability and portability).
-
Maximum weight when full: Approximately 88 lbs per bag.
Step 4 – Seal the Bag
-
After filling, screw the cap back tightly.
-
Ensure no leakage by gently squeezing the bag.
Step 5 – Attach to Canopy Legs
-
Wrap the built-in Velcro strap around the canopy leg.
-
Position the bag close to the ground for maximum stability.
-
Tighten the strap until the water bag is firmly secured.
Step 6 – Final Check
-
Repeat the process for all 4 bags.
-
Make sure every bag is well-sealed, firmly attached, and evenly distributed on the canopy legs.
✅ Maintenance Tips
-
Do not drag the bags on rough surfaces to avoid scratching the PVC.
-
Empty water before storage or during freezing-temperature weather.
-
Clean with mild soap and water—avoid sharp tools or chemicals.
-
Store in a cool, dry place when not in use.
