Metal frame parts (4 posts, cross beams, diagonal beams, top support frame)
Hardtop roof panels (double-tier design)
Netting set (with zippers)
Top decorative cap
Hardware kit (screws, nuts, washers)
Tool kit (hex wrench)
Instruction manual
Choose a flat, stable surface and clear away debris.
Unpack and organize all components according to the instruction manual for easy access.

Attach the 4 posts to the base plates using screws.
Ensure all posts are vertical and base plates are level to avoid tilting.

Connect the top of the posts with horizontal beams to form the square/rectangular frame.
Add diagonal support beams for enhanced stability.

Attach the main roof support beams (center beam and diagonal beams) to the top frame.
Install the upper support structure for the double-tier top.

Fix the smaller upper-tier panels onto the upper roof frame.
Secure the top decorative cap to seal and enhance the appearance.

Starting from one side, fix the lower-tier hardtop roof panels to the roof frame.
Align each panel carefully and secure with screws.

Slide the hooks of the netting into the pre-installed rail track.
Adjust each side so that the netting opens and closes smoothly.

Check all screws to ensure they are tightened securely.
For windy areas, consider adding ground stakes or extra weights for better stability.
We recommend at least 4 people for assembly.
Regularly check and tighten all screws.
In extreme weather (storms, heavy snow), consider temporarily removing the roof panels.
For cleaning, use warm water and mild detergent—avoid harsh chemicals.
Explore more ABCCANOPY’s Products:
10x10 Canopy | 10x10 Custom Canopy | Custom Canopy | Pop Up Canopy | Canopy Tent | Canopy Accessories | Gazebo
Canopy By Size:
6x6 Canopy | 6.6x6.6 Canopy | 8x8 Canopy | 8x12 Canopy | 8x16 Canopy | 10x12 Canopy | 10x15 Canopy | 10x20 Canopy | 12x12 Canopy | 13x13 Canopy | 8x8 Custom Canopy Tent | 10x10 Custom Canopy Tent | 10x15 Custom Canopy Tent | 10x20 Custom Canopy Tent