Installation Guide
📦 Package Contents
-
1 × Foldable steel frame with adjustable legs
-
1 × Double soft-top canopy fabric
-
1 × Awning rod set (round rods with rope, square rods with clips)
-
1 × Mosquito netting set (4 panels with zippers)
-
1 × Hardware kit (clips, ropes, stakes)
-
Carry bag and tools
🛠 Assembly Steps
Step 1 – Frame Setup
-
Two people pull the steel frame outwards from opposite corners until half-open.
-
Adjust the legs to middle height for easier setup.
Step 2 – Install Main Canopy
-
Place the double soft-top fabric over the frame.
-
Align the corners and secure with Velcro straps to the frame.
Step 3 – Awning Installation
-
Connect the round rods with the internal rope into one piece.
-
Slide the awning fabric onto the round rod.
-
Fix square rods onto the tent legs with clips.
-
Connect the round rods with the square rods, then tie the awning fabric to the main canopy with ropes.
Step 4 – Attach Mosquito Netting
-
Hang mosquito netting panels on the hooks along canopy edges.
-
Zip the four panels together to form a fully enclosed room.
-
Fix the bottom with ropes or ground stakes.
Step 5 – Final Adjustment
-
Fully extend the canopy legs to the desired height.
-
Secure the gazebo with ropes and stakes for stability.
-
Check all connections before use.
✅ Maintenance Tips
-
Avoid heavy snow load on the roof.
-
Clean canopy fabric with mild soap and water; air dry before storage.
-
Regularly check joints, clips, and ropes.
