For 8x8 / 10x10 / 10x15 / 10x20 Canopy
Compatible with S1 / S2 / S3 Series

Package Contents

 1× or 4× Sidewall Panel(s) (depending on purchase)

 Hook-and-loop straps (pre-attached)

 Zipper connection (for multi-panel sets)

 Bottom fixing straps (optional style)

Installation Steps

Step 1 — Prepare the Canopy

 Fully set up your ABCCANOPY frame and canopy top.

 Ensure the legs are extended and the canopy is tensioned properly before adding sidewalls.

Step 2 — Attach the Sidewall to the Top Frame

 Locate the top Velcro straps on the sidewall.

 Wrap each strap around the canopy top truss bar.

 Fasten the Velcro tightly from left to right along the entire top edge.

This step ensures the sidewall hangs smoothly and firmly.

Step 3 — Secure Side Edges to Canopy Legs

 Align the sidewall edges with the canopy legs.

 Use the vertical Velcro straps to wrap around each leg.

 Pull firmly to keep the sidewall straight and flat.

Step 4 — Connect Multiple Sidewalls (If Applicable)

If using 2–4 panels:

 Use the built-in zippers to join the panels together.

 Zip from bottom to top to prevent sagging.

 Ensure the zipper connection is smooth and aligned.

Step 5 — Fix the Bottom Edge

Depending on your sidewall type:

 Some panels include bottom fixing straps—wrap them around the canopy legs or insert stakes if outdoors.

 This step prevents flapping and increases wind resistance.

Step 6 — Final Adjustment

 Smooth out wrinkles and adjust the tension.

 Make sure all Velcro points are secured.

 Double-check the zippers and corners.

Your ABCCANOPY sidewall is now fully installed.

Tips for Best Performance

 Always install sidewalls after the canopy top is fully set up.

 For windy conditions, pair with ABCCANOPY weight bags or stakes.

 Clean with mild soap and water; avoid harsh chemicals.

 Store dry to prevent mildew.