1. Product Overview
The ABCCANOPY water-filled umbrella base is made of durable HDPE material and designed to provide stable support for patio umbrellas by adding weight through water filling.
Ideal for lawns, decks, poolside areas, and gardens.
2. Package Contents
Water-Filled Umbrella Base × 1
Center Pole Insert Sleeve (with adapter rings) × 1
Locking Knob / Set Screw × 1
3. Before Installation
Before installation, please ensure:
The base is placed on a flat, solid surface
Clean water is available
The umbrella is fully closed
4. Installation Steps
Step 1: Position the Base
Place the empty umbrella base on the selected location, making sure it sits flat on the ground.
Step 2: Fill with Water
Open the water fill cap on the base.
Slowly fill the base with clean water until nearly full (approx. 33 lbs).
Securely tighten the cap to prevent leaks.
Step 3: Insert the Pole Sleeve
Insert the center pole sleeve into the opening of the base.
Select the appropriate adapter ring based on the umbrella pole diameter for a snug fit.
Step 4: Insert the Umbrella Pole
Insert the umbrella pole vertically into the sleeve.
Ensure the pole is fully seated and upright.
Step 5: Secure the Umbrella
Tighten the locking knob or set screw to firmly secure the umbrella pole in place.
Step 6: Check Stability
Gently move the umbrella to confirm it is securely fixed and stable.
5. Usage Tips
Close the umbrella during strong winds
Periodically check the water cap and locking knob
Drain water and store dry during winter or long-term storage
6. Safety Notice
Do not use the base without water
Not suitable for severe weather conditions
Do not sit or stand on the base