Installation Instructions (Sand Not Included)
ABCCANOPY Extra Large Single-Tube Sand Bags are designed to add significant weight at the base of canopy legs, improving stability for pop-up canopies, gazebos, and outdoor shelters—especially in windy conditions.
Extra Large Sand Bags × 4
(Filling material not included)
Prepare the following items before installation:
Dry sand (recommended), gravel, or other heavy material
Funnel or small scoop (optional)
Fully assembled canopy or gazebo
Note:
Install sand bags only after the canopy frame is fully set up and adjusted to its final height.
Place the sand bag upright on the ground and open the top zipper or closure.
Make sure the interior is clean and dry.
Slowly pour sand or other filling material into the bag.
Fill to approximately 90% capacity, depending on the selected size (100 / 112 / 150 lbs).

After filling, fully close the zipper to ensure the bag is tightly sealed and leak-free.
Position the sand bag vertically around the bottom of the canopy leg.
Use the built-in Velcro straps or fastening bands to secure it tightly against the leg.

Repeat the above steps for each canopy leg.
For best stability, use all four sand bags together.

For windy environments, use together with stakes or guy lines
Regularly check that all bags remain securely fastened
Empty and fold the bags for dry storage when not in use
Sand bags provide added stability but are not a permanent anchoring solution
Always dismantle the canopy during severe weather conditions
Explore more ABCCANOPY’s Products:
10x10 Canopy | 10x10 Custom Canopy | Custom Canopy | Pop Up Canopy | Canopy Tent | Canopy Accessories | Gazebo
Canopy By Size:
6x6 Canopy | 6.6x6.6 Canopy | 8x8 Canopy | 8x12 Canopy | 8x16 Canopy | 10x12 Canopy | 10x15 Canopy | 10x20 Canopy | 12x12 Canopy | 13x13 Canopy | 8x8 Custom Canopy Tent | 10x10 Custom Canopy Tent | 10x15 Custom Canopy Tent | 10x20 Custom Canopy Tent