1 × Heavy-duty folding steel frame
1 × Waterproof canopy top
1 set of ground stakes & ropes
1 × Wheeled carrying bag
Optional: Sandbags, sidewalls (depending on model)
Remove the folded frame from the wheeled carrying bag.
Place it upright on a flat, open surface.
Two people should stand on opposite corners and gently pull the frame outward until it’s halfway open.

Unfold the canopy top and lay it over the partially opened frame.
Align all four corners of the fabric with the top corners of the frame.
Use the Velcro straps to secure the top to the truss bars and corners.

Continue pulling outward from opposite corners until the frame locks fully into place.
Push up the center slider mechanism from underneath until it clicks to secure the roof structure.

Press the push-buttons on each leg and raise all legs evenly to your desired height (3 height options typically available).
Ensure all four legs are locked at the same level.
Use the included stakes to anchor each leg to the ground.
Tie the ropes from the canopy top corners to the ground for added wind resistance.
For extra stability, attach optional sandbags around the base of each leg.
Always set up with 2 or more people for safety and efficiency.
Do not use in strong wind, heavy rain, or stormy weather.
Always dry the canopy top before storage to avoid mold.
Avoid using ground stakes on uneven or soft ground like mud or loose sand.
Explore more ABCCANOPY’s Products:
10x10 Canopy | 10x10 Custom Canopy | Custom Canopy | Pop Up Canopy | Canopy Tent | Canopy Accessories | Gazebo
Canopy By Size:
6x6 Canopy | 6.6x6.6 Canopy | 8x8 Canopy | 8x12 Canopy | 8x16 Canopy | 10x12 Canopy | 10x15 Canopy | 10x20 Canopy | 12x12 Canopy | 13x13 Canopy | 8x8 Custom Canopy Tent | 10x10 Custom Canopy Tent | 10x15 Custom Canopy Tent | 10x20 Custom Canopy Tent